Best Sliding Compound Miter Saws – Dual and Single Bevel Miter Saws

The best sliding compound miter saws of 2017 have approximately one thing in common: They’re all saws – an essential tool for woodworking. For any kind of woodworking projects, you will need all sorts of essential tools. There are some hand tools and power tools which are required specifically. It’s basically up to you that what sort of tool you apply for working on a project.

But one of the most powerful tools you will need when working with wood is a compound miter saw. This woodworking tool can be used for any type of cutting procedures. It is a very convenient tool used for trimming and cutting small pieces of wood. And the best miter saw that you can buy – is the sliding compound miter saw.

In a woodworking business, the use of sliding miter saws is very common, though there are individual-level consumers too. One thing we must admit, sliding saws are the best of all, and there is no doubt about that. If your intent is to buy a sliding compound miter saw that can offer the best and most precise cuts, then make sure that you prioritize compound miter saws that are equipped with a laser marker. So, what is the best sliding compound miter saw to buy right now? Check the article below to find out.


Best Sliding Compound Miter Saw No.1: Hitachi C12RSH2 12-Inch | Dual Bevel

Best Sliding Compound Miter Saw No.1: Hitachi C12RSH2 12-Inch

  • Power: 15 Amp
  • Blade size: 12-Inch
  • No-Load Speed: 4000 RPM
  • Laser Marker: Yes
  • Miter Cutting Range: 0-45 Degree L; 0-57 Degree R
  • Bevel Cutting Range: dual bevel – Left & Right 0-45 Degree

The Hitachi C12RSH2 gives increased cutting capacity with no clearance required for the rear of the saw allowing it to be used in tight spaces such as against walls.

Cuts are precisely made with the laser guide. Trim is easily handled with the positive miter stops at L/R 0, 15, 22.5, 31.6, 45 Degrees. The dust bag makes it easy to clean up both during and after the work is complete. The wide range of cutting capabilities allows a single tool to be used in the workshop when working with wood. The positive stops, laser guide allow for accurate cutting without guesswork.

A maximum 4000 RPM no-load speed is achieved by the fifteen amp motor making cutting through tough woods easy and smooth. Increased control and slippage prevention are achieved with the elastomer grip on the vertical handle that reduces the vibrations. The interior of the saw and the workspace is kept cleaner by the dust bag that minimalizes dust accumulation. The saw’s life is prolonged as a result of the dust being minimalized.

See Now
back to menu ↑

Best Sliding Compound Miter Saw No.2: Makita LS0815F | Single Bevel

Best Sliding Compound Miter Saw No.2: Makita LS0815F

  • Power: 10.5 Amp
  • Blade size: 8-1/2-Inch
  • No-Load Speed: 5000 RPM
  • Laser Marker: No
  • Miter Cutting Range: 0-50 Degrees left & 0-60 Degrees right
  • Bevel Cutting Range: single bevel – 0°- 48° (left)

The Makita LS0815F slide compound miter saw is one of the best on the market in its class. It offers the best cutting precision in a lightweight, easy to carry design. The Makita LS0815F boasts a powerful 10.5 amp motor with soft start and an impressive 5000 RPM for great performance.

This high-quality miter saw is also specially designed to never slip or bog down which is a common problem among belt-drive models. It also has a useful 6 positive miter stops at 0°, 15°, 22.5°, 31.6°, 45°, and 50° (left and right), and an additional stop at 60° (right). This sliding compound saw is also a very durable model which is guaranteed to last.

The Makita LS0815F sliding compound miter saw is a great tool for a wide range of uses. Such as flooring, molding, trim and even carpentry! This miter saw is a perfect choice and is a great tool for almost anyone who needs to use a miter saw frequently.

See Now
back to menu ↑

Best Sliding Compound Miter Saw No.3: Bosch CM10GD 10-Inch | Dual Bevel

Best Sliding Compound Miter Saw No.3: Bosch CM10GD 10-Inch

  • Power: 15 Amp
  • Blade size: 10-Inch
  • No-Load Speed: 4800 RPM
  • Laser Marker: No
  • Miter Cutting Range: 52° Left, 60° Right
  • Bevel Cutting Range: dual bevel – 0-47° left and 0-47° right

The Bosch CM10GD overall is a well put together piece of equipment built to give its owners top notch performance for years with minimal upkeep. With its built-in precision, those repetitive cutting jobs are quicker and easier to finish. The design and engineering make this tool an intuitive piece of equipment to own. The front-mounted controls are convenient, and along with the other user-friendly components, make the Bosch CM10GD a highly productive piece of equipment that is safer to operate.

Even those shops that are equipped with some of the best tools on the market, having a Bosch CM10GD will add to your shop’s efficiency. With the rising number of home workshops and their demand for smaller equipment, this glide compound miter saw offers a variety of capability with good space management.

If a combination of precision along with miter options will benefit your shop, then the Bosch CM10GD is one of the best sliding compound miter saws to buy.

See Now
back to menu ↑

Best Sliding Compound Miter Saw No.4: Bosch GCM12SD 12-Inch | Dual Bevel

Best Sliding Compound Miter Saw No.4: Bosch GCM12SD 12-Inch

  • Power: 15 Amp
  • Blade size: 12-Inch
  • No-Load Speed: 3800 RPM
  • Laser Marker: No
  • Miter Cutting Range: 52° Left, 60° Right
  • Bevel Cutting Range: dual bevel – 0-47° left and 0-47° right

The Bosch-exclusive Axial-Glide offers wider cross-cuts, enhanced alignment and a smooth glide for the life of the tool. The Bosch miter saw’s 15 Amp motor delivers no-load speeds of 3800 RPM for quick, accurate cuts in many materials. For added convenience and versatility, the saw is compatible with a variety of 12-Inch blades and it has a clear lower guard to provide unobstructed cut-line visibility. The Bosch GCM12SD provides easy adjustments with upfront bevel and miter controls and detents at common angles. The saw’s all-metal bevel lock lever and range selector are located up front to make bevel adjustments easy.

See Now
back to menu ↑

Best Sliding Compound Miter Saw No.5: Milwaukee 6955-20 12-Inch | Dual Bevel

Best Sliding Compound Miter Saw No.5: Milwaukee 6955-20

  • Power: 15 Amp
  • Blade size: 12-Inch
  • No-Load Speed: 3200 RPM
  • Laser Marker: No
  • Miter Cutting Range: 45° Left, 45° Right (The Milwaukee 6955-20 has a Digital Miter Angle Readout at the front of the turntable that displays the miter angle of the turntable to a resolution of 0.1°.)
  • Bevel Cutting Range: dual bevel – 0-48° left and 0-48° right

The Milwaukee 6955-20 sliding compound miter saw is for someone who needs to make accurate fine adjustments quickly and easily. If accuracy, power, and ease of use are important in completing your projects then this is the saw for you. The Milwaukee 6955-20 is the top of its class in accuracy, power, and ease of use. This sliding compound miter saw uses a heavy duty, durable steel plate with stops (detents), and provides repeatable accuracy at each detent.

The soft start reduces the amount of torque reaction at startup, which makes for ease of use and adds durability to the miter saw. The Milwaukee 6955-20 soft start gradually increases the motor speed up from zero to the top of the no-load speed. The saw’s electronic feedback control circuit causes this ease of use in the operation and allows for the constant speed of the motor in a load or no load situation.

The Milwaukee 6955-20 does not bog down with a heavier load. This miter saw has an electric brake system which engages when the trigger is released. The blade will stop, allowing you to quickly review your work, then proceed on with your work.

The Milwaukee 6955-20 has a digital meter angle readout that allows for fine adjustments to be made quickly and easily. At the front of the turntable, the saw has a digital meter angle readout that displays the miter angle of the turntable to a resolution of 0.1 degrees.

Applications that are possible with this saw are cutting baseboards, crown molding, cabinetry projects, stairs, handrails, and window and door casings. If you have a non-square situation, such as a window or door casing, using the combination of the miter angle fine adjustment system and the digital meter angle readout the cuttings can be made easily and quickly.

The dust management system allows for all dust to be blown behind the saw, allowing for continuous work and less cleaning. The many advanced features make this saw the choice over its competitors.

See Now
back to menu ↑

Best Sliding Compound Miter Saw No.6: Makita LS1216L 12-Inch | Dual Bevel

Best Sliding Compound Miter Saw No.6: Makita LS1216L 12-Inch

  • Power: 15 Amp
  • Blade size: 12-Inch
  • No-Load Speed: 3200 RPM
  • Laser Marker: Yes
  • Miter Cutting Range: 52° Left, 60° Right
  • Bevel Cutting Range: dual bevel – 0-45° left and 0-45° right

The first feature you will like on the Makita LS1216L is the four steel rail system and the ball bearing type of system. With this type of system in place, you do not have to worry about any of your cuts floating out of line or even worse having your saw lose control and splinter your wood into something you cannot use at all. So you will really like to see this feature and know your cuts will be done precisely each time you use the compound miter saw to make a cut.

The dual sliding fence is another feature which you can enjoy. By having moving fence, you do not have to be concerned about the wood not fitting in front of the fences, but also not have to be concerned about not getting to complete your work.

The powerful motor is another great feature you can enjoy as well. Typically motors of miter saws are driven by belts and lose some of their power in the transition from the belt to the gears. With this saw, the motor is direct drive so you do not have to be concerned about losing any of the power you normally would have been losing.

Laser guidance which is present with this saw is a great feature for you to see as well. With this type of guidance, you do not have to be concerned about your cuts drifting off the center of your cut.

See Now
back to menu ↑

Best Sliding Compound Miter Saw No.7: Makita LS1019L 10-Inch | Dual Bevel

Best Sliding Compound Miter Saw No.7: Makita LS1019L 10-Inch

  • Power: 15 Amp
  • Blade size: 10-Inch
  • No-Load Speed: 3200 RPM
  • Laser Marker: Yes
  • Miter Cutting Range: 60° Left, 60° Right
  • Bevel Cutting Range: dual bevel – 0-48° left and 0-48° right

A sliding compound miter saw with lasers is the perfect answer if the objective is to get precise cut every time. With the Makita LS1019L, you can expect no tough wood would be forgiven and every cut will be as precise as possible.

There is also electronic speed control that maintains constant speed under load for smoother, higher-quality cutting. This is also complemented by the soft start technology that allows you to have better grip and control of the saw.

In short, the Makita LS1019L sliding compound miter saw is the better choice if the intent is to use the saw for a number of applications. Want to continue with your hobby? Use this compound miter saw in cutting and fabricating your kitchen cabinets.

By all accounts, Makita has continued its excellence through its compound miter saws – saws that are packed with leading-edge innovation and backed with best-in-class engineering.

See Now




      Login/Register access is temporary disabled